SMART. ADAPTABLE. REVOLUTIONARY.

The electric commercial truck is here. It's making deliveries, it's hauling materials, it's keeping produce cool, and it's doing all of these jobs on the same proven foundation as the diesel International® MV™ Series - it just happens to be electric. Easy to use, comfortable to operate and offering iron-clad dependability, the new International® eMV Series is a groundbreaking solution with real-world usability. It's the electric truck - built just right.

INTERNATIONAL® eMV™ SERIES KEY FEATURES

  • Typical range: 135 miles*
  • Peak power: 342hp (210KWh Lithium Iron Phosphate (LFP) Battery)**
  • 3 levels of regenerative braking
  • Acceleration equal to or better than diesel
  • Battery Thermal Management System (BTMS) using standard red coolant
  • Lower maintenance compared to diesel
  • Available turn-key charging solutions from International® Zero Emissions Team

*Actual range is based on environmental conditions, driving behaviors, diminishing loads and maximum use of regenerative braking, etc.

**Useable capacity is approx. 189 kWh. Actual range is based on environmental conditions, driving behaviors, etc.

Blue International Truck
  • 2-in-1 Inverter,
    Onboard Charger,
    HV Distribution Unit

  • Air Compressor
    and Air Tanks

  • Battery
    Thermal
    Management
    System
    (Battery
    Coolant
    Chiller)

  • Charging
    Inlet -
    Driver
    Side

  • Cooling Module

  • High Voltage
    Batteries

  • Motor

  • Motor Inverter

  • Switch Box
    and High
    Voltage
    Distribution
    Box

  • +
  • +
  • +
  • +
  • +
  • +
  • +
  • +
  • +

Chassis Image w Callouts

FACTORY-INSTALLED INTERNATIONAL® eMV SERIES BODY POWER OPTIONS

The International eMV Series truck offers ePower and ePTO options that use the propulsive batteries to power a wide range of body applications. From a simple plug in, to an electric motor SAE-B flange, you now have the muscle needed to get the job done.

ePTO ELECTRICAL SYSTEM

The factory installed ePTO is ready to power your boom, crane, bucket and more. Quiet, electric power offers a variety of benefits including the ability of operators in the bucket to easily communicate with those on the ground. 

Single Connection

  • High Voltage - 210 kWh Lithium Iron Phosphate batteries with dedicated HVAC system**
  • 609 Volt operating Voltage
  • Amphenol Powerlok Gen2
  • Typical applications:
    • Utility
    • Dump
International Truck eMV Series

ePOWER ELECTRICAL SYSTEM

The power from the propulsive battery can be utilized to operate energy-intensive body applications like refrigeration. Now, food and other perishables can be delivered locally in an emission-free manner. 

Dual Connection

  • High Voltage - 210 kWh Lithium Iron Phosphate batteries with dedicated HVAC system**
  • 609 Volt operating Voltage
  • 19 kW x2 Connections
    • TE HVA280 Connectors
  • Typical applications:
    • Refrigerator
    • Shredder

**Useable capacity is approx. 189 kWh. Actual range is based on environmental conditions, driving behaviors, etc.

 

OPTIONS AND SPECS

Electric Motor Specs

All eMV™ Series models have the following electric motor specifications:

  • Peak motor HP: 342HP/225lb-ft.
  • Typical range: 135 mile battery capacity*

*Actual range is based on environmental conditions, driving behaviors, diminishing loads and maximum use of regenerative braking, etc.

Chassis Configurations

All eMV Series models are available in the following configurations:

  • 4x2

 GVW: 25,999 and 33,000 lbs.

Wheelbase Options

All eMV Series models are available in the following configurations:

  • A.F. Dry Van
    • 272" / 112" typical (26' box)
    • 254" / 106" typical (24' box)
    • 236" / 100" typical (22' box)
    • 217" / 100" typical (20' box)
  • Service Body
    • 217"

Available Warranties

All eMV Series models are available with the following warranties (unless noted):

  • Standard Warranty*:

Chassis Warranty: 2 Years, Unlimited Miles
Drive Battery: 5 Years, 100,000 Miles
Drive Motor: 5 Years, 100,000 Miles
Drive Charger & Cables: 5 Years, 1,000,000 Miles

  • Extended Warranty Options*:

Variety of extended warranty contracts available in addition to base warranty

*See warranty page for details.

WARRANTY DETAILS

GETTING THE JOB DONE.

DELIVERY

Need to make local deliveries? You can count on the eMV Series to get the goods from point A to point B-and anywhere in between. Plus the eMV Series may be able to access certain roads and urban areas where diesel trucks are not permitted, opening even more business opportunities.

International Truck parked on street
Service Truck

SERVICE

Thanks to an advanced ePTO system available from the factory, a wide range of service bodies can be mounted. The near-silent power means operators in a bucket can now easily communicate with those below, enhancing both safety and productivity at the jobsite.

LANDSCAPING

Landscaping jobs require the transportation of a wide variety of tools and equipment while leaving room for the removal of branches, leaves and whatever else needs to go. This means a stake body is the preferred truck. The eMV Series stake body truck can handle whatever the job requires while driving in neighborhoods and municipalities without creating emissions or noise.
Landscaping truck
Red International Truck parked in gravel

CONSTRUCTION

Construction takes both skill and capability. The eMV Series dump truck is ready to get to work on the jobsite. Offering all the toughness the diesel MV Series is known for, the eMV Series can haul, transport, and dump quietly and efficiently. In some cases, the eMV Series may be able to operate in places a diesel truck may not be appropriate, like a city park or inside a convention center.

REFRIGERATED

Equipped with the ePower feature, the eMV Series refrigerated truck gets power directly from the vehicle's battery pack, which provides the electricity needed to keep cargo at optimal temperatures.
International Truck eMV Series

STAY THE COURSE

Not every trip goes as planned - and not every other driver on the road is paying attention. That's why the International® eMV Series is equipped with safety systems designed to help your drivers (and your equipment) out of harm's way.

Anti-Lock Braking System (ABS)

Anti-Lock Braking Systems (ABS) help prevent the wheels from locking up during hard braking events. The system works by rapidly activating the brakes so the driver can still steer and maintain control of the truck while slowing down. This helps the driver avoid skidding, especially in slippery conditions like rain or snow. Most eMV Series non-emergency braking is accomplished through regenerative braking. This process uses the motor to slow the vehicle and directs the recaptured energy to the main battery which helps to extend the overall range of the truck.

Electronic Stability Control (ESC)

Bendix® Electronic Stability Control (ESC) technology is a full stability system, offering both roll and yaw stability to potentially help mitigate loss of control and/or rollover. This ABS-based system can potentially recognize and assist in both understeer and oversteer loss-of-control driving events. This advanced feature is particularly helpful in adverse weather conditions, including snow, ice rain, dust, sand, and more.

Automatic Traction Control (ATC)

Automatic Traction Control (ATC) can regulate wheel spin during acceleration to help improve traction in various conditions. The ATC system will intervene automatically at lower speeds by applying braking pressure to a spinning wheel and transferring engine power to other drive wheels that have better traction. This feature is especially useful at jobsites where road conditions may include dirt, gravel, sand, or ice.

STEEL SANCTUARY.

MAINTENANCE SCHEDULE

It's no secret electric vehicles require less maintenance. With substantially fewer parts, an electric motor simply does not have the maintenance or service requirements of an internal combustion engine. Plus, thanks to regenerative braking, the standard brakes last much longer between service intervals.

TAKE THESE OFF YOUR SERVICE PLATE:
  • No engine oil maintenance
  • No transmission maintenance
  • No fuel filters
  • No turbos, no EGR, no injectors
  • No engine air filters, no MAF and no 02 sensor
  • No after treatment
Vehicle Coverage Years Miles 
Chassis Warranty 2 years Unlimited
Drive Battery 5 years  100,000
Drive Motor 5 years 100,000
Drive Charger & Cables 5 years 1,000,000 

 

FEATURES

Exterior Hotspot

  • +
  • +
  • +

Interior

  • +
  • +
  • +
  • +

SITUATIONAL AWARENESS. ELEVATED.

  • +
  • +
  • +
  • +
  • +
  • +
  • +
  • +
  • +
  • +
Blue International Truck

BUILT AROUND YOU

The eMV Series can be tailored to your specific needs. Start building yours today.

Build Your Own

OUR EV ROADMAP:
Your path to a seamless transition

We understand that transitioning a commercial fleet to electric may sound daunting. That's why we've created a team to guide you through the process. Our trusted advisor team helps customers plan, execute, and optimize zero-emission vehicles and investments for the entire lifecycle. The team handles everything from consulting to charging to electric vehicle (EV) deployment.
Icon for ICB Consulting

CONSULTING

Finding the best way forward

Our discovery workshops dive into your fleet’s electrification needs and concerns, building a customized EV roadmap for success.

International Trucks Zero Emissions ICB Charging Icon

CHARGING

 

Laying the groundwork

We assess the placement of hardware and infrastructure, finding the best ways to support your vehicle charging and uptime.

 International Trucks employees reviewing ICB deployment on smart board

CUSTOMER ONBOARDING

Bringing it all together

We ensure your charging locations, staff, and remote diagnostics are prepared for your electric fleet to hit the road.


CONSULTING

International dealers and trusted advisors are ready to help fleets of all sizes develop a fully integrated and scalable zero emissions strategy. The consulting process includes the evaluation of requirements, and efficiencies, route simulations, and education on all available funding sources, grants, and tax incentives. Start the journey to electric by connecting with one of our advisors today.
CONNECT WITH AN ADVISOR
Photo of an  International Trucks employee wearing a shirt with the logo on the front

CHARGING

Building out a charging solution that’s appropriate for today but flexible enough to grow as you grow, can be a complicated process. We’re here to make that process as smooth as possible by working side-by-side through site planning and engineering, AC and DC charger installation, site management, equipment certification and financing for both vehicles and infrastructure.

19.2 KW Charger Info 30 KW Charger Info
Photo of a blue truck at an  International Trucks charging statoin

CUSTOMER ONBOARDING

Once your charging equipment is installed and ready to get to work, we’ll be on hand to make sure your team is fully trained on the systems and process that can ensure the best possible results. This includes safety training, maintenance and the use of digital remote diagnostic tools that can significantly boost uptime and lower costs.
ZERO EMISSIONS TRAINING
International Trucks employees reviewing zero emissions data on smart board
X

Use of Cookies and Privacy Notice Update

Cookies are used on this site to assist in continually improving the user experience and all the interaction data we store of our visitors is anonymous.

Learn more about your rights on our Privacy Notice page.

Confirm